i320 waste ink counter reset. 1. Turn off the printer. And disconnect the printer cable. 2. Press and hold the POWER button, turn on the printer. 3. The indicator (L.E.D.) should be green. 3. Press and release the RESUME button , the indicator (L.E.D.) should be orange. 4. Press and release the RESUME button again, the indicator (L.E.D.) should be green. 5. Release both buttons. 6.Reconnect the printer cable. 7.Open General Tools software and select (USB PORT) 8.Choose (SET DESTINATION 1) And it should be reset. Download the free software from here. Canon Generic "i" series workaround Here is a submitted workaround but, it is only temporary. This is copy that was on a google group message: I have a temporary fix (doesn't keep without power): 1: Unplug power and USB. 2: Open door and hold power button. 3: Connect power. 4: Close door, then release power button. Connect USB and press power to use. |